© Powered by SiteSpirit

 
logo.jpg

Twitter Facebook Linked In YouTube
Nederlands

Calibration News

News

New -80 degree Celsius temperature calibration bath from Isotech Isotech introduced a new model in the range of Orion temperature baths.
The new Orion model 796L does have a temperature range from -80°C to 125°C. Of course this is realized with the same accuracy and specifications from the other two Orion baths.

The Orion calibration baths offer deeper calibration volumes than the Isotech Hydra s... Programmable resistance load The Meatest M-192 is an accurate resistance power load with adjustable output in range from 15 Ohm to 300 kOhm.
The load can be used up to 3000W power and 250 Vrms. The M-192 frequency range is from DC to 10 kHz.
The programmable load is organized as a set of power resistance segments switched using relays.

Two versions of t... Single- or three phase Power calibrator. Model M-133 master unit is one phase electric power/energy calibrator. It can supply unit under test with one phase accurate AC voltage and current with calibrated phase shift or DC voltage and current.
Output voltage can be set in five ranges up to 280 V and output current in six ranges up to 30 A. Simulated electric power can be set indepen... Unique Thermal Validation software TQSoft is the leading thermal validation software available.
It works with most leading data acquisition and calibration equipment, and can be configured for all thermal validation requirements. TQExpress report functions are integrated into TQSoft, to make validation reporting quick and efficient.

The new TQsoft version 5 is now ... Cropico 3000 Temperature meter now with scanner options The Cropico Series 3000 is a digital thermometer of very high accuracy (0.01 °C) and very high resolution (0.001 °C) at an economical price. To ensure that the very best measurements are achieved, PRT probe characteristics may be entered and stored using either CVd or ITS90 coefficients. The measuring current may be reduced by 0.707 to determine se... World's first -100 degree Celcius Dry Block The Isis Dry Block offers operation to temperatures as low as -100°C, and is the only block bath working to such a low temperature. Now it is possible to calibrate temperature sensors such as PRTs, Thermocouples and Thermistors at ultra low temperatures without the need for a liquid bath.

Portability and Safety
Unlike a liquid bat... New Isotech catalogue for Primary and Secondary laboratories Isotech does have a new catalogue available, Solutions for Primary and Secondary Laboratories. This completely revised and updated book includes products that were previously in Data Books 1 and 2 along with new products, selection guides and technical information.

Get your free copy. Click here and mention Isotech catalogue in the subject field.
 Fixed point temperature standard. (ITS-90) Isotech did introduce a new type of ITS-90 Calibration Device.
These devices use a siphonic cell - a combined heat pipe and ITS-90 Fixed Point Cell. Additionally an immersion compensator provides an isothermal zone to compensate for stem conduction problems.
The result is an affordable calibration solution providing performance that pre... Precision thermometer up to 100 micro Kelvin Isothermal Technology Limited (Isotech) has introduced a new type of precision thermometer, which will be the new world standard for accuracy and stability. Designed for a wide range of highly accurate industrial and scientific calibration applications, the instrument uses a completely new measurement technique to achieve accuracies better than 0.1... Low cost high precision temperature indicator Quite simply the Isotech TTI-22 High Accuracy Thermometer sets new standards in the price to performance ratio for industrial and secondary resistance thermometry. If you need high accuracy at an affordable price you have to look at the TTI-22. The TTI-22 has an accuracy of 0.001°C and a resolution of 0.0001°C (0.00004 Ohms).

It has two... New temperature calibration bath from Isotech The Orion calibration baths offer deeper calibration volumes than the Isotech Hydra series with world class temperature stability. There is a high temperature model (30°C to 300°C) and a model with built in refrigeration (-40°C to 125°C). The Orion unit has sufficient depth, 470mm (18.5"), to accommodate Isotech's largest Water Triple Point Cells p... BetaGauge 330 Hand Held Pressure Calibrator Martel unveiled the BetaGauge 330 Hand Held Pressure Calibrator with Integrated Electric Pressure Pump at the ISA Expo 2008 in Houston, Texas. The calibrator is a revolution in pressure calibration technology for the process industries. The new BetaGauge® 330 Pressure Calibrator has been engineered to put an end to the complicated use of hand opera... Software for calibrating electric power transducers Meatest introduced the software program POWER
This program is designed for executing and recording of calibrations of electric power transducers. The system allows creating of calibration procedures for various transducers. The result of the system is test report containg all measured and evaluated values. Electric power/energy calibrator Meatest just introduced the new M-133 master unit is one phase electric power/energy calibrator. It can supply the unit under test with one phase accurate AC voltage and current with calibrated phase shift or DC voltage and current. Output voltage can be set in five ranges up to 280 V and output current in six ranges up to 30 A. Simulated electric ... New DMC-1400 Multifunction Calibrator Martel Electronics Corporation releases a significant set of enhancements for the operation of it's DMC-1400 Documenting Multifunction Calibrator. With the new features, the user now has more control over the testing procedures for field instrumentation.
The enhancements include firmware updates and a substantially revised Martel USV software... Meatest Multifunction calibrator model M-142 The new Meatest Multifunction calibrator M-142 an extension of the complete range of multifunction calibrators from Meatest.
This is a calibrator of electric quantities for applications in calibration laboratories and in production lines where meters are manufatured. It can be used for calibration and adjustment of meters from the field of vol... The 3001 Precision Laboratory Calibrator Martel Electronics Corporation announces the availability of the 3001 Precision Laboratory Calibrator, the newest and most advanced of its family of laboratory grade multi-function calibrators. The precision laboratory calibrator combines the power and features of the M2000A (voltage, current, thermocouple, RTD and pressure) with a second completel...

Copyright 2008 - TTMS                                               Customer Service +31 (0) 252 621 080 - Contact - Route